The GAGALASER GA-RGB10000 show laser light is completely equipped with diodes and has a good white balance, with linear color fading behavior and high visibility.
Advantages of the GAGALASER GA-RGB10000 laser light are:
The GAGALASER GA-RGB10000 has a beam diameter of about 5.5 mm and beam divergence of only 1.3 mrad.
The complete projector is built with Sealed Housing Technology and is cooled through the external cooling fins (bottom part). Thus the maintenance effort is kept very low.
At the back of the unit there are trim pots for color settings, so the color balance can be quickly adjusted. The X- / Y-axis offset can also be set by trim pots. Additionally the Scan Safety can be set at the back side of the laser system.e.
There are safety features like a key switch, an interlock interface and an on-off selection in LCD.
Download Use manual
Total Power typical:
3000 mw / 638nm
3000 mw / 520nm
4.5000 mw / 450nm
ca. 5.5 mm / 1.3 mrad
stand-alone, sound-to-light, DMX, ILDA, Master-Slave,SD
galvo system, 40 / 50 kpps
Scan Angle max.:
ca. 200 (layers, tunnels, fences, waves, etc.)
power cable, manual, interlock connector, key
85V - 250 V AC